[ad_1]
This text initially appeared on Schoolhouse, a Portland-based firm within the Food52 household of manufacturers.
When you’re in search of a easy but efficient means so as to add appeal and character to any room in your house, we’d simply have the right remedy: DIY beadboard. When you’re not acquainted, this kind of paneling has been a basic design aspect for hundreds of years, and is understood for its timeless look and flexibility. Whether or not you are going for a standard aesthetic or a extra trendy vibe, beadboard is a straightforward and efficient approach to elevate any area.
Able to create your personal beadboard wall at house? This is all the things you may want, plus some useful suggestions and tips to information you thru the (comparatively simple) course of.
- Beadboard Panels: These come in several sizes and kinds, so be certain to measure your wall and select the suitable measurement and magnificence to your challenge.
- Trim Boards: Measure the size of your beadboard with the intention to set up a trim board above it and canopy the uncooked edges. Moreover, if you wish to create a shelf like we did, you may want one other board on the identical size to nail to the highest of the trim board.
- Shaker Pegs: Make sure to buy those with screws on the again for straightforward set up.
- Nails and Nail Gun: When you’re utilizing beadboard panels that require nailing or screwing, you may want a nail gun or drill, plus acceptable nails or screws.
- Spackle: Hold spackle helpful to fill in any nail or screw holes and seams.
- Sandpaper: So you may clean out any tough spots on the beadboard.
- Primer: It is really helpful to prime the beadboard earlier than portray or staining it to make sure correct adhesion and a smoother end.
- Paint: Select a paint shade that enhances your decor and observe the producer’s directions for software.
- Paint Curler, Brush, and Paint Tray: You may want these to use the paint to the beadboard.
Earlier than putting in your beadboard, it is necessary that the floor is clear, dry, and freed from any obstacles. In case you are putting in beadboard over drywall or plaster, it’s advisable to take away any wallpaper or paint and sand down any tough spots.
As soon as the realm is obvious, measure the place you may be putting in the beadboard to find out what number of panels you have to. There are a number of several types of beadboard, however for this challenge we used House Depot’s “Beadboard White True Bead Panel” created from HDF materials.
For this step, we truly minimize the items to measurement at House Depot the place the supplies have been bought. That mentioned, when you have instruments at house, you should utilize a round noticed or a jigsaw to chop the panels to your required measurement.
There are a number of methods you may adhere beadboard to a wall, however for this explicit challenge we used a nail gun for set up. If you do not have a nail gun (we truly rented one from House Depot!), you may apply building adhesive to the again of your beadboard panel utilizing a caulk gun, however be sure you apply adhesive to the perimeters and corners of the panel to make sure a safe bond.
Earlier than you get began, examine to see if you could minimize round any shops, switches, or different obstacles. In that case, you should utilize a jigsaw to take action (if you do not have entry to a jigsaw, you will get scrappy and use miter shears relying on the fabric of your beadboard, however it won’t be the prettiest).
When you’re going the nail gun route, begin by positioning the panel on the wall and press firmly into place whereas another person makes use of a degree to make sure that the panel is straight. Then, use a nail gun to safe the panel to the wall. Nail the panel each 6 to eight inches alongside the perimeters and corners to make sure a safe attachment. You can too add a number of nails in the course of the board to verify it is flush with the wall behind it.
As soon as all of the panels are put in, you may set up the trim in the identical method. Merely maintain it up in opposition to the wall, guarantee it is degree, and use a nail gun to safe it in place. To create the shelf, we merely put one other piece of trim board on high of the present one and nailed that into place utilizing the nail gun as nicely (about 8 nails in complete, however it is determined by the size of your wall).
Including shaker pegs to the completed product actually made it stand out. We bought 3-inch-long, screw-on shaker pegs from Amazon to finish the look. Merely screw them into place and viola! As soon as all the things has been put in, use wooden filler to fill any nail holes or gaps between panels. Sand the floor clean and end with the paint of your alternative.
Relying on what kind of beadboard you select to your challenge, there generally is a small hole when lining up your minimize items. To fill within the hole, use DAP DryDex Spackling Compound, after which give it a light-weight sanding as soon as it is dry. It stuffed within the hole completely in our case.
Have you ever tried DIY beadboard? Tell us within the feedback!
[ad_2]
Source link